![]() There are actual two fuses that power the Driver's door module, one is common to both the DDM and PDM so I don't think this fuse is bad, it's 11C/27 but fuse 11C/35 is unique to the DDM and this is the one to check carefully, it's a 25A fuse and located on the left side of the dash as is 11C/27. If a DDM needs programming, does it not work at all? If it is JUST the driver's side accessories that cannot be controlled, does the whole module need to be replaced?Īs Chrism mentioned, check the fuse. Is the module good and needs to be reprogrammed? OR is the module bad and needs to be replaced AND the new module reprogrammed? I do not understand if the problem is with s/w or with the module it's self. I can see the DDM, I can control everything the DDM can control, except what I cannot directly do via the module as described above. I have check the wiring harness and I have check and cleaned all the pins that connect to the DDM. View Connector, Housings and terminals full diagram for your Volvo XC70. I have removed the module, I have disassembled it, cleaned it, check all contacts, checked all connections. Driver/Passenger Door Module (DDM)/ (PDM). It will control all the windows, locks and passenger door mirror, BUT will NOT control the drivers window, lock or mirror. So I have had the DDM (driver's door module) stop working correctly in my 2004 XC70 P2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |